SAOA VOLLEYBALL LINE JUDGE TRAINING ©2014 Dwayne

Line Judge Expectations Line Judges have to maintain the same image as other match officials inside and outside the competition area. (i.e. PROFESSIONALISM)
Line Judges must show exemplary conduct throughout the competition (including before, during, and after the match!).
Line Judges also need to adhere to established guidelines (i.e. showing up on time, proper uniform, honoring assignments, etc.).<br>

Pre-Match Instructions Before the match begins, the first referee will give instructions to the crew. These instructions cover all facets of game management.
The first referee will also let the Line Judges know what they are looking for and give line assignments .
Listen carefully to the first referee’s instructions and ask questions if necessary for clarification.<br>

Line Judge Signals Signals used must be those approved by the NFHS and/or NCHSAA.
Signals are to be shown clearly so that the referee, the players, coaches, and spectators can understand the call being made.
The signal must be quick, sharp, and held for a moment . (and repeated if required)
Communication with the officiating crew is paramount.<br>

Line Judge Signals (cont’d) Signal #1 – Ball “In”
Flag in the hand heldoutward at a 45 degreeangle.
Used when the ball touchesthe playing court, includingthe boundary lines.
Signaled by the line judge who controls the line nearest to where the ball touches the floor.<br>

Line Judge Signals (cont’d) Signal #2 “Out”
Point straight up withthe flag.
Used when the part ofthe ball that touches the floorlands completely outside theboundary lines.
Used to indicate the balltouching an object outside thecourt, the ceiling or a person outof play.
Used to indicate the ball touching the ropes, posts, or net itselfoutside the side bands.
Signaled by the line judge whocontrols the line nearest to wherethe ball touches the floor.<br>

Line Judge Signals (cont’d) Signal #3 “Ball Touched”
Raise the flag and touch the topof the flag with the palm of thefree hand.
Used when the ball istouched by the blocker(s) ora player of the receiving/defending team and thentouches the floor outside ofthe boundary lines on thesame side OR when a team has played the ball and itlands out on their own side.
Signaled by the line judge whocontrols the line nearest towhere the ball touches the floor.<br>

Line Judge Signals (cont’d) Signal #4 “FootFault” or “BallOutside Antenna”
Wave the flag over thehead and point to theantenna or the end line.
Used when the ball crosses thevertical plane of the net partiallyor completely outside theantenna into the opponent’scourt OR it touches net featuresoutside the antenna OR whenthe server faults OR when a player is outside their own court at themoment of the service hit.
Signaled by the line judge who isresponsible for the line where theinfraction takes place.<br>

Line Judge Signals (cont’d) Signal #5“Impossibleto Judge”
Place both armsacross the chestforming an “X”.
Used when the line judgeis unable to evaluate afault within theirjurisdiction
Example: Whena player blocksyour view of the play.<br>

Line Judge Positioning Line Judge positions are assigned to each Line Judge by the First Referee prior to the match.
Line Judges stand at the corners of the court closest to the right hand of each referee, diagonally in the corner.
Once a line judge has an established his/her position, they retain it for the entire match.<br>

Line Judge Positioning (cont’d) The graphic below shows how line judges should position themselves on the court.<br>

Line Judge Positioning (cont’d) There are essentially three positions when line judging:

1) Relaxed – feet close together, standing erect, flag held
down at the waist with both hands.

2) Ready position – higher knee bend, athletic position
with feet shoulder width apart, one foot in front of the
other; as play progresses this transitions to a deeper
knee bend and allows for movement as necessary.

3) Signaling – back to erect standing position, with flag
used to indicate detected fault (if no fault, you revert to
the relaxed position)<br>

Line Judge Positioning (cont’d) During a rally, line judges may need to move from their assigned locations – this is usually to:
Avoid interfering with players playing the ball.
Better observe a ball crossing the net near an antenna.
To keep the ball in sight during ball contact with player(s) or equipment, including the ‘pancake’ dig.
To keep their body facing the action at all times.
To report to the first referee when summoned to the referee stand.<br>

Line Judge Positioning (cont’d) There are other situations that arise in a match that dictate the line judge’s location:
Pre-match Protocol (Player Introductions, National Anthem, etc)
Time outs (Regular & Injury )
Intermission Between Sets
Post-match protocol (If Applicable)
Please Note: Each league may have different requirements and protocols. One of our jobs as the officiating crew is to know the protocol!<br>

Line Judge Positioning (cont’d) The graphic below shows path that each line judge takes toward the First Referee’s stand. Take note that line judges do not walk on the court during the transition to and from the new position.<br>

Line Judge Positioning (cont’d) The graphic below shows the correct line judge position during a time out. The line judge transitions back to their assigned spot at the sound of the 45 second warning horn or when both teams come back on the court.<br>

During The Match Getting ready to make a call:
Our attention span during play is of major importance.
Continual scanning of the ball in play and the line of responsibility allows for temporary evaluation. i.e. Look from the ball to the line about 2-3 times per play to ready yourself for judgment.
This is done by moving the eyes rather than the head (unless head movement is necessary).<br>

Techniques & Tips Be prepared – this will help you achieve the best level of concentration and condition to work the match.
Stand in a position which allows evaluation of play within your jurisdiction – you can move, especially to avoid interfering with play.
Signals should be made quickly and should be decisive – the sequence for line judges is: 1) See, 2) Decide, and 3) Signal (making eye contact with the First Referee)<br>

Techniques & Tips (cont’d) Focus
- Pay attention to those points or areas where the rally is taking place.
- Briefly follow the ball path, then change focus (the ‘snap-shot’ method).

Anticipation
- Looking forward after seeing the initial contact, and anticipate the landing where a decision is required.<br>

Techniques & Tips (cont’d) At no time should there be any discussion between a team member (coach, player, etc) and a line judge.
If the line judge is being harassed or notices some other irregularity, they should signal and go to the first referee to inform them of the facts – only the first referee can apply sanctions if necessary.

If the ball lands in/at/near the corner (no touch)
On your line the ball is out, signal ‘out’
On your line the ball is in and without any doubt in on the other line, signal ‘in’
On your line the ball is in, but the other line is uncertain make eye contact with the other line judge.

Your partner, following the sequence in this process, will be:a) signaling “out” as in #1, YOU signal “out”,b) signaling “in” as in #2, YOU signal “in”,c) looking at you, meaning it’s not out for either of you, BOTH line judges signal “in”.
These are not steps, but actually one decision that leads to a signal or eye contact – communication is paramount!<br>

Being Over-ruled by the First Referee Keep in mind, when working as a line judge and signaling, you’re indicating judgment.
The first referee may or may not agree with your assessment – if the first referee disagrees, don’t insist on your signal.
Don’t let your eyes get as big as dinner plates. Remember your body language.. It says a lot!
Relax, re-focus, and be ready for the next play.
At the next time out or after the match, politely ask the First Referee what you may have missed.
Remember… Communication is the key to success!<br>

Line Judge Responsibilities As a Line Judge, I perform my duties by using a flag to signal:
The foot faults of the server
Any contact with the antenna on their side of the court by any player during their action of playing the ball or interfering with the play.
The ball crossing the net outside the crossing space into the opponent’s court or touching the antenna on their side of the court.
I also have to repeat my signal should the first referee request it!<br>

Line Judge Responsibilities (cont’d) The ball ‘in’ and ‘out’ whenever the ball lands near my line.
The touches of ‘out’ balls by the team RECEIVING the ball.
The ball touching the antenna, the served ball crossing the net outside the antenna, etc
Any player (except the server) stepping outside of their playing court at the moment of the serve.<br>

Available Resources SAOA Volleyball Websitewww.southeasternofficials.com

NFHS Websitewww.nfhs.org

NCHSAA Websitewww.nchsaa.org<br>

Questions?<br>