CoverCool CuddleBlanket CoverCool unit amp power cord Insulated duvet Cool pad amp hose ColdFlowII amp funnel Manual Loop back First ensure you have everything you should ID: 732920
Download Presentation The PPT/PDF document "How to set up the Flexmort" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
How to set up the Flexmort
CoverCool™(CuddleBlanket)Slide2
CoverCool
™ unit & power cord
Insulated duvet
Cool pad & hose
ColdFlowII
& funnel
ManualLoop back
First ensure you have everything you shouldSlide3
Check the unit contains the correct amount of
ColdFlowII
If not remove the filler cap and fill to the red line with
ColdFlowII
It will not require very much fluidSlide4
Always use
ColdFlowIIFailure to do so can damage the machine, which will not be covered by the warranty
If you require more
ColdFlowII
please email info@flexmort.comSlide5
Plug the power lead into the unit and switch onSlide6
The display will light up and an alarm may sound. Do
not worry, this
is normalSlide7
Connect the hose, it does not matter which way around!Slide8
The two green lights on the front will be lit if the unit is set up correctly
The green is the set point and the red is the actual temperature of the cool pad
If the alarm sounds and the red light is lit see trouble shooting guideSlide9
To set/change the temperature
Press the ‘P’ button SP (set point ) will flash
Using the arrows set the green numbers to the required temperature
Then press the ‘P’ to lock this in
Most users have the
CoverCool
™ set at 8ׄ°CThe unit will remember what the last setting was and when turned on again will revert back to this Slide10
The
CoverCool system is now up and running, check the fluid it may need topping up
Place the cool pad over the deceased who can be wearing clothes, a shroud or in a
bodybag
The cool pad is positioned just below the neck
We recommend using a thin sheet between the cool pad and the deceased
Use another thin sheet on top of the cool padLay the insulated duvet over the top, ensure that you cover the cool padTuck the duvet around the deceased to prevent the ambient air getting to the cool padYou can use any blankets or duvet over the top as belowSlide11
When the unit is no longer required, disconnect the hose with the power on!Slide12
Turn the switch off and remove the power cableSlide13
The
CoverCool
can be cleaned with
any standard plastic safe
Cleaning the
CoverCool
systemSlide14
You can also contact us at info@flexmort.com and we will be happy to confirm the suitability of your current cleanerSlide15
Trouble shootingSlide16
I am getting condensation…..
We recommend that two cotton sheets are used 1 under & 1 on top of the cool pad
Depending on the ambient temperature these may require to be changed
Ensure the insulated duvet is used, and is tucked around the deceased
Try to minimise the amount of air reaching the cool pad
First check there is
ColdFlowII in the reservoirEnsure there are no kinks or something such as a trolley wheel on the hoseCheck the connections at the unit and the cool pad
The unit is alarming…..
It is still alarming, what can I do?Slide17
Find the Loop back…
Connect Loop back…
If the unit stops alarming try the cool pad again
If the alarm continues to alarm or starts alarm again you do have a fault
For further information or assistance please contact us at info@flexmort.com
+44 (0)8455 333561