ag and align Broadrick Plane to upper radius desired Since there is a relatively small divergence cases Variation is only necessary when a pronounced curve at curve of Spee 3 Position the center po ID: 878524
Download Pdf The PPT/PDF document "The Broadrick Occlusal Plane Analyzer i..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 The Broadrick Occlusal Plane Analyzer i
The Broadrick Occlusal Plane Analyzer is used for analyzing the Curve of Spee and developing an accept-and centric relation record. Remove maxillary cast from articulator during survey procedures. The Broad-rick Occlussal Plane Analyzer, consists of: (1) Broadrick Plane, (1) Compass with leads and Center Point, L-BOPA REV 4BROADRICK OCCLUSAL PLANE ANALYZER INSTRUCTIONS ag and align Broadrick Plane to upper radius desired. Since there is a relatively small divergence cases. Variation is only necessary when a pronounced curve at curve of Spee 3. Position the center point of the compass on the Anterior Survey Point (A.S.P.), the disto-incisal of the cuspid, and Survey Point (P.S.P.), the disto-buccal cusp of the lower second molar, and apply an arc to intersect the A.S.P. arc on the incisal table. Remove upper cast and select a P.S.P. on 580 S. Rancho Avenue
2 Colton, California 92324, USATel: (90
Colton, California 92324, USATel: (909) 783-1841 USA & Canada (800) 368-9777 This instruction applies to the following item: the 4 radius. The center point of the compass is now pierced into this O.P.S.C. on the plastic record card. 8. Mark an R and the patients name on the plastic cation. A plastic record card repeat the procedures for the left survey.P.S.P. is the Condylar Posterior Survey Point (C.P.S.P.), a position on the condylar element of the articulator. remove the right Motion Analog and replace with the Locator Pin. Place upper frame back into articulator, articulator.element (C.P.S.P.) and apply an arc to intersect the A.S.P. arc line on the plastic record card. This intersection of A.S.P. arc line and the P.S.P. or C.P.S.P. arc lines create the Occlusal Plane Survey Center (O.P.S.C.). L-BOPA REV 4 Degree of Accuracy: within .01in / .254mm