applications ELSB GPG Energy Distribution Global Product Management FH200 RCCBs for Residential applications ELSB GPG Energy Distribution Global Product Management November 4 2019 ID: 1001663
Download Presentation The PPT/PDF document "FH200 RCCB for Residential" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1. FH200RCCB for Residential applicationsELSB GPG Energy Distribution, Global Product Management
2. FH200RCCBs for Residential applicationsELSB GPG Energy Distribution, Global Product Management
3. November 4, 2019Slide 3RCCBs FH200Product overview Range designed for domestic installationPerformances engineered for this kind of applicationType AC, ANo need of CPI, limited value of lncm, lower costNot accessorizedAccording to IEC/EN 61008 FH200Home
4. FH200November 4, 2019Slide 4Type (wave form of the earth leakage sensed)Main differences FH200 vs F200Comparison vs F200Product familyF200FH200Accessories compatibilityYesNoCPIYesNoMax rating [A]12563Type AC, A, A/APR, F, B, B+AC, ARated conditional short circuit current10kA6kAAmbient temperature [°C]-25 ..... +55-5 .... +40FH200FH200
5. November 4, 2019Overview of the rangeSlide 5FH200FV200FH200SPoles2, 422TypeAC, AACAC, AResidual current [mA]30, 100, 3003030, 300Rated current [A]25, 40, 6325, 4025, 40, 63Market availabilityGlobalSpainFranceSpecial releaseIEC HOME (EXTRA-EU), STD1 HOME (EU 1), STD2 HOME (EU 2), STD1&2 HOME (EU 1&2), CEBEC (BELGIUM), KEMA HAF (NL)VIVIENDA (SPAIN)LCIE (FRANCE)
6. November 4, 2019Slide 6Product at a glanceFH 200 shows failsafe bi-directional cylinder lift terminals: they are useful when it is needed to wire with both cables and busbar or when it is necessary to feed more downstream lines of MCBs.The front slot of the terminal can be wired with cables up to 25 mm2, while the back one is suitable for wiring with busbars or cables up to 10 mm2.Possibility to connect two independent cables in the same device: the second terminal can be used for an auxiliary circuit or for the supply of devices with small section cables without connecting them together with the main circuit.
7. November 4, 2019Slide 7Product at a glanceTest pushbutton to verify the correct functioning of the device.
8. November 4, 2019Slide 8Product at a glanceInformation on the device are laser printed to make them clearly visible and long lasting.Laser-marked order code on the front to make easier future orders.
9. November 4, 2019Slide 9Product at a glanceInformation on the device.All the safety ensured by the international marks: approvals’ marking in a visible area, even if RCDs is installed and with the panel-door closed.
10. November 4, 2019Slide 10Product at a glanceInstruction sheet Installation manual is laser printed on the device
11. November 4, 2019Slide 11Auto-reclosing unitAuto-reclosing unitThe FH202 can be coupled with the autoreclosing unit F2C-ARH in order to ensure continuity of service for the whole installation of your home avoiding lack of supply.
12. November 4, 2019Slide 12Main quality marksCountry approvals
13. A large number of approvals available Standard EU Test report and certificate available for main countriesFast installation without using any toolsDouble terminals: busbar + wires Fail safeBi-directional supply Fast clip on bottom side for easier removal operationHighlights and benefitsEasy to install Global availabilityContinuous operationFull compatibility with all ABB busbar Auto-reclosing devices compatible with the rangeSpecial versionDedicated version for special markets (Spain, France, Belgium, Netherland)Dedicated version for overseas market (Supply voltage 110 V)November 4, 2019Slide 13
14. November 4, 2019Slide 14