/
Information Technology Solutions GET THE LOWEST FREEZE POINT When salt brine is Information Technology Solutions GET THE LOWEST FREEZE POINT When salt brine is

Information Technology Solutions GET THE LOWEST FREEZE POINT When salt brine is - PDF document

celsa-spraggs
celsa-spraggs . @celsa-spraggs
Follow
459 views
Uploaded On 2015-03-20

Information Technology Solutions GET THE LOWEST FREEZE POINT When salt brine is - PPT Presentation

176 or with a salime ter 85 it has the lowest freeze point possible about 0F BRINE STORAGE 23 brine solution may be stored outside however if temperatures get below 0F the brine may freeze A cir culator pump will reduce the risk of freezing If possib ID: 47983

176 with salime

Share:

Link:

Embed:

Download Presentation from below link

Download Pdf The PPT/PDF document "Information Technology Solutions GET THE..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

Information Technology Solutions GET THE LOWEST FREEZE POINT When salt brine is 23% salt (measured with a hydrome-ter: 1.176, or with a salime-ter: 85%) it has the lowest freeze point possible (about BRINE STORAGE 23% brine solution may be stored outside, however if temperatures get below 0°F the brine may freeze. A cir-culator pump will reduce the risk of freezing. If possible store brine indoors to elimi-nate risk of freezing. COST OF BRINE Calcium chloride brine costs Brine Making Mixing Tank Water In Holding Tank Float a hydrometer or salimeter directly in your holding tank and read the value at the surface of the water. The number should be either 85% or 1.176 depending on the units of If the values are too low, pump some brine from your holding tank back into the mixing tank and allow it to overflow. If values are too high simply add some fresh water Images courtesy of Iowa DOT Produced in partnership with: