University Center Black Box Equipment in class University Center LCD ProjectorBuilt In Screen Laptop Connection VGA Cord Control Panel Black Box DVDVCR inside Turning on Av System ID: 158323
Download Presentation The PPT/PDF document "Audio Visual Training" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Audio Visual Training
University CenterSlide2
Black Box Equipment in classUniversity Center
LCD Projector/Built In Screen
Laptop Connection (VGA Cord)
Control Panel
Black Box (DVD/VCR inside)Slide3
Turning on A/v System University Center
Use the key provided
by the University Center front desk to
unlock the black box.Slide4
Turning on A/v System University
Center
Once the black box is open, pull out the drawer located inside and you’ll find a VGA cord, plug it into your laptop.
If you have a Mac laptop use your VGA adapter.Slide5
Turning on A/v System University Center
*Turn Master Switch on inside the black box.
*Master Switch will light up red if it is in the ON position.Slide6
Turning on A/v System University Center
Press the “ON” button located on the top left hand side of the control panel and the projector will begin turning on.Slide7
Projecting a laptopUniversity Center
Once the projector is completely on, press the “PC” button on the control panel and your laptop will project onto the screen.Slide8
Projecting a LaptopUniversity Center
If your PC laptop does not project onto the screen, press and hold the “FN” key located on the bottom left hand side of your laptop’s keyboard.
While holding the “FN” key press the
“F8” key if you have a Dell laptop.“ F4” key if you have an HP laptop.or“F5” key if you have a Toshiba/Sony laptop.Then release them both at the same time.Slide9
Projecting a laptopUniversity Center
If your Mac laptop does not display go into your System Preferences and double click “Displays”.
When Display window opens, click “Detect Displays”.
Then click on the “Arrangements” tab.After Arrangement Tab opens check the box in the bottom left hand corner that says “Mirror Displays”.Slide10
Projecting a LaptopUniversity Center
To adjust the volume coming from your *laptop press the “VOL +” and “VOL –” buttons on the right hand side of the control panel.
*Please note, volume must also be turned up on your laptop to receive sound.Slide11
Projecting a DVDUniversity Center
To play a DVD, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.Slide12
Projecting a DVDUniversity Center
Press the Eject button next to the DVD player to open it. Place DVD in player with label up. Push the
E
ject button again to close and load the
DVD player.Slide13
Projecting a DVDUniversity Center
Press the “DVD” button on the right hand side of the control panel to have projector display the DVD player.Slide14
Projecting a DVDUniversity Center
There are 3 ways to control your DVD:
Use
control buttons located
on the bottom of Control Panel.2. Use control buttons located on the DVD player itself.3.Use the remote located in the Black Box drawer if there is a menu you need to navigate through.Slide15
Playing a DVDUniversity Center
To adjust the volume coming from the DVD press the
“VOL +” and “VOL –” buttons on the right hand side of the Control
P
anel.Slide16
Playing a DVDUniversity Center
To stop the DVD press the STOP button located on the bottom left hand corner of the DVD player.
Press the “Eject” button to retrieve your DVD.Slide17
Projecting a VHSUniversity Center
To play a VHS, turn on your DVD/VCR combo player by pressing the “Power” button on the bottom left hand corner of the player.Slide18
Projecting a VHSUniversity Center
Put your VHS tape into the slot on the right hand side of the player.Slide19
Projecting a VHSUniversity Center
Press the “VCR” button on the left hand side of the control panel to have projector display the VHS tape.Slide20
Projecting a VHSUniversity Center
There are 3 ways to control your VHS:
Use
control buttons located
on the bottom of Control Panel.2. Use control buttons located on the VCR player itself3.Use the remote located in the Black Box drawer.Slide21
Projecting a VHSUniversity Center
To adjust the volume coming from the VHS press the
“VOL +” and “VOL –” buttons on the right hand side of the control panel.Slide22
Projecting a VHSUniversity Center
To stop the VHS press the STOP button located on the bottom left hand corner of the VCR.
Press the “Eject” button to retrieve your VHS.Slide23
Turning oFF the A/v System University Center
To turn off the A/V System press the “OFF” button located on the top left hand corner of the control panel twice.Slide24
Turning oFF the A/v System University Center
Turn off your laptop, disconnect it from the VGA cord and you have completed shutting down the A/V system.
Please place back all items removed from the drawer.
(remotes, VGA cord,
etc).Slide25
Turning OFF A/v System University Center
Lock
the Black
Box and return the key to the University Center front desk.Slide26
Audio Visual Contact infoUniversity Center
Office Phone: Ext. 76120
Office Email:
avt@kean.edu
Office Location: Technology Building Room 110 Office Website: http://www.kean.edu/~avt/This presentation was created by Katherine Roba kroba@kean.edu ~ 908 737 6122