few inches extends over edge for easy access to undersideof floor7Nest second floor over first floor NOTE Seams onsecond floor up through ceiling center bracket9 Install one 632 acorn nut 25 on one e ID: 895685
Download Pdf The PPT/PDF document "Perch bracketsKit wrenchesTape strips se..." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
1 Perch bracketsKit wrenchesTape strips (s
Perch bracketsKit wrenchesTape strips (see step 15)1-1/4 A clamps1-1/2 B clampsLinksPulley end assembly1/4-20x3/4 Carriage bolts1/4-
2 20 Hex nuts1/4 Lock washers1/4-20 Lock n
20 Hex nuts1/4 Lock washers1/4-20 Lock nut1/4-20x2 Hex head bolt10-32x1/2 self-threading screws10-24 Lock nut1/4 I.D. steel washer1/
3 4x2 Spring pinPARTS IN LARGE PLASTIC BAG
4x2 Spring pinPARTS IN LARGE PLASTIC BAGABC114Lanyard lock assemblyCover#6x3/8 Sheet metal screwsPARTS IN LANYARD LOCK BAG4344451212
4 12Floor clips6-32x1/4 Machine screws6-32
12Floor clips6-32x1/4 Machine screws6-32 Keps nutsPARTS IN FLOOR CLIP BAG(Packed inside large bag)PARTS PACKED IN BUNDLE(See page 3)
5 NP1211122 ft. ropeRope cleat few inches
NP1211122 ft. ropeRope cleat few inches extends over edge for easy access to undersideof floor.7.Nest second floor over first floor.
6 (NOTE: Seams onsecond floor up through
(NOTE: Seams onsecond floor up through ceiling center bracket.9. Install one 6-32 acorn nut (25) on one end of each of thesix tie
7 rods (9). Use kit wrench (28) after star
rods (9). Use kit wrench (28) after starting. On ceil-ing locate tie rod holes between two larger holes Ñ abouttwo inches in from ed
8 ge of ceiling. (Refer to page 3, if nec-
ge of ceiling. (Refer to page 3, if nec-essary.) Insert tie rods (9) into these holes as shown. Usenail to align holes in assembly,
9 if required. Guide tie rodthrough hole i
if required. Guide tie rodthrough hole in top floor, then rotate rod slowly and it willdrop through assembly. Thread 6-32 acorn nut
10 (25) ontolower end of tie rod on undersi
(25) ontolower end of tie rod on underside of bottom floor. Do nottighten completely at this time. Repeat with balance of tierods. A
11 SSEMBLY INSTALLATION.The ground socket i
SSEMBLY INSTALLATION.The ground socket is installed in concrete and clampssecurely to post. This allows the pole and house to bemove
12 d to another location without losing the
d to another location without losing the bottom sectionof post.TM-12 MINI-CASTLEPOSTASSEMBLYINSTRUCTIONSÑ CONTINUEDTM-12 INSTRUCTION