1 Side service door for easy filter change For the fitting of Mini Pleat filters or activated carbon filter cells Clamping ID: 591207
Download Presentation The PPT/PDF document "Duct casings for particulate filters DCA" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Duct casings for particulate filters DCA
1
Side
service door for easy filter change For the fitting of Mini Pleat filters or activated carbon filter cells• Clamping mechanism for secure sealing and air-tight fitting of the filter element• Quick installation: Casing frame can be used as connecting frame
Upstream
side
Downstream
sideSlide2
Duct casings for particulate filters DCA
2
The duct casing can be installed into
the duct using the casing frame as a connecting frame. Possible connecting flanges up to 40 mm on the upstream side and on the downstream side Common flange sizes on site are 30 mm The screws must be set at 15 mm from the bottom of the casing (mid of 30 mm flanges) The casing must be sealed on the
perimeter connecting flanges
when installed into the
duct system
AirflowSlide3
Duct casings for particulate filters DCA
3
Frame
system inside of the DCA with filtersSlide4
Duct casings for particulate filters DCA
4
The Mini Pleat Filter
of the dimension 610x610x292 mm has to be placed on the support brackets Please consider that the flat section seal of the filter must be pressed against the frame system The clamping mechanism is used for the airtight fitting of the filter
Support
brackets
for filter
element
Frame
system
inside
of
the
DCA
with
filters
Clamping
mechanism