Jodie Marburger wwwbeaumitchellboutiquecom Steps of Applique Gather your items garment fabric Heat amp bond lite scissors Iron hoop Cut fabric square and your Heat amp Bond Lite slightly smaller than your fabric ID: 526089
Download Presentation The PPT/PDF document "How to Applique" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
How to AppliqueSlide2
Jodie Marburger
www.beaumitchellboutique.comSlide3
Steps of Applique
Gather your items (garment, fabric, Heat & bond lite, scissors, Iron, hoop)
Cut fabric square and your Heat & Bond Lite slightly smaller than your fabric. Slide4
Iron the back of your fabric on the dry cotton setting of your iron(no steam). Add Heat & Bond lite to fabric- shiny side down & until completely adhered to fabric- use no steam, only a dry iron setting.Slide5
Place hoop on your surface, place stabilizer on top of hoop. Slide6
Place garment
on top of both stabilizer and hoop
bottom. Slide7
Place hoop top(with the arms for the machine) on the top and push hoop top into place securing all layers in the hoop. Make sure the surface is wrinkle free and tight like a
drum (front and back)
FRONT
BACKSlide8
Now your hoop is ready for the machine & to begin the applique process. Slide9
Begin by running your first placement stitches. Stop the machine when finished.Slide10
Now place the applique fabric on the garment, covering the placement stitches completely by the fabric.Slide11
Remove hoop from machine and cut around the applique tack down stitches as close as you can, but do not cut the stitches. Also be careful not to cut garment. Do this for each applique piece.