Coull What is a Racing Drone Generally custom built No GPS Limited stabilization FPV VERY fast 120 MPH Motors 3 4 6 8 Our Build EMAX CWCCM Motor HobbyWing XRotor 15A Brushless ID: 803426
Download The PPT/PDF document "Drone Build By: Alex Leslie and Matthew" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Drone Build
By: Alex Leslie and Matthew Coull
Slide2What is a Racing Drone
Generally custom built
No GPS
Limited stabilization
FPVVERY fast (120 MPH)Motors: 3, 4, 6, 8
Slide3Our Build
EMAX CW/CCM Motor
HobbyWing
XRotor 15A Brushless ESC
FlSky i6 Transmitter and Receiver
CC3D
Flight Controller
3S 11.1V 1300mAH T-Plug Li-Po Battery HobbyWing 5V 3A UBEC
Slide4Motors
2350 KV rating2x Clockwise and 2x counter clockwise
Allow for flight by creating significant lift via props
Slide5ESC’s
Electronic Speed ControlTake input signal from transmitter and convert it to throttle pulses
Gives the distinctive whining noise of a drone
Slide6Transmitter/Receiver
Transmitter: sends signals on several channels based on control inputsReceiver: Takes the signals and converts them to electrical impulses
Slide7Flight Controller
A tiny circuit boardIts function is to alter the RPM of each motor based on pilot input
Slide8How the system works
Slide9Battery
3s 11.1V LiPo
1300
mAh
Slide10UBEC
Universal Battery Eliminator CircuitA small, DC step-down converter (~5v)
Used to power flight controller, receiver and FPV (Optional)
Slide11Test Flight(s)
https://youtu.be/-
Unv4PA7eEE
Slide12Side Projects
Bonner Law’s droneSolar panel setup
Sense HAT
NB Drone League
Slide13Challenges/Hiccups
Wrong motors (All same direction)Props that are too large
Shipping times
Slide14What we did
Assembled the frame
Installed motors
Installed ESC’s
Soldered the ESC and motor wires
Wired the flight controller
Slide15RESOURCES
https://images.amain.com/images/large/hwa/hwa30901100.jpg
https://www.arrishobby.com/images/MT-EMAX-RS2205-KV2300-2-Pairs.jpg
https://img.banggood.com/thumb/water/upload/2015/06/SKU250323.jpg
https://hobbyking.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/legacy/catalog/108148.jpg
https://costruzionedroni.it/920-big_default/cc3d-revolution-f4-flight-controller.jpg
Slide16Slide17Slide18Slide19Slide20