Determine length of sole and top plates Layout stud position on both at the same time Measure and mark length of studs Cut studs to length Lay studs out between top and sole plates Nail through plates into studs to attach them ID: 509487
Download Presentation The PPT/PDF document "Determine where to put the wall." is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
Determine where to put the wall.Slide2
Determine length of sole and top plates. Layout stud position on both at the same time.Slide3
Measure and mark length of studsSlide4
Cut studs to lengthSlide5
Lay studs out between top and sole platesSlide6
Nail through plates into studs to attach them.Slide7
Completed wall section with all studs securedSlide8
Raise wall into placeSlide9
Check for plumbSlide10
Secure to ceiling joistsSlide11
To secure material to concrete slab, a powder actuated nail gun is used.Slide12
Wall secured to concrete slab with concrete nails Slide13
Add sheetrock and secure with screwsSlide14
One side complete with sheetrock
(viewed from unfinished side)Slide15
InsulateSlide16
Completed sheetrockSlide17
Tape and spackle joints and screw holes.