The Gutter Guzzlers Jonathan Wallace Ben Goodrich CJ Hurt Richard Bryn The Gutter Guzzlers Introduction Our projects goal was to design and build a contraption that could lift a 1 kg weight 1 meter in the air in roughly 10 seconds ID: 481800
Download Presentation The PPT/PDF document "EF 151 Team Project 6" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.
Slide1
EF 151 Team Project 6
The Gutter Guzzlers
Jonathan Wallace, Ben
Goodrich
C.J. Hurt,
Richard Bryn Slide2
The Gutter GuzzlersSlide3
Introduction
Our projects goal was to design and build a contraption that could lift a 1 kg weight 1 meter in the air in roughly 10 seconds
The parts were found around EST 13 and the parts that were bought were cheap and easily foundSlide4
Overview
The first step in this design is to fill the top bucket with about 2 L of water. When ready we simply open the valve that is connected to the bottom of the top bucket so the water will run down the gutter and fill the bucket at the end of the gutter, which will eventually lift the 1 kg weight.Slide5
The ContraptionSlide6
Potential Energy
The Water – Potential Energy to Kinetic Energy
The Bucket- Potential Energy to Kinetic EnergySlide7
Conclusion
Our contraption took around 6 hours to build and required help from all of the team, planning took even longer to get it right.
Complication – LEAKS
Finally we are done with 151, good luck to all.