/
2.2.2017 Day 2 Lino Block 2.2.2017 Day 2 Lino Block

2.2.2017 Day 2 Lino Block - PowerPoint Presentation

tatyana-admore
tatyana-admore . @tatyana-admore
Follow
389 views
Uploaded On 2017-03-14

2.2.2017 Day 2 Lino Block - PPT Presentation

Collect your minibooklet at the door from last class Read any response that was written and check your grade on it Those of you that need to makeup the bell work from last class please do so Look through your drawings you should have three and pass the safety test in order to get your bloc ID: 524304

lino block test cut block lino cut test quiz pass gouge sketch order project print carve cutting carving tip

Share:

Link:

Embed:

Download Presentation from below link

Download Presentation The PPT/PDF document "2.2.2017 Day 2 Lino Block" is the property of its rightful owner. Permission is granted to download and print the materials on this web site for personal, non-commercial use only, and to display it on your personal computer provided you do not modify the materials and that you retain all copyright notices contained in the materials. By downloading content from our website, you accept the terms of this agreement.


Presentation Transcript

Slide1

2.2.2017 Day 2 Lino Block

Collect your mini-booklet at the door from last class

Read any response that was written and check your grade on it

Those of you that need to make-up the bell work from last class please do so

Look through your drawings – you should have three and pass the safety test in order to get your block todaySlide2

Pick One

Negative Positive Space Switch

Reduction Print (cut, print, cut, print)

Front and back of the block(carve both sides)Slide3

Agenda

Process Sketch

See Carving Tools

Go over QuizTake QuizTake Quiz until you pass!!!!Sketch & Finalize Block Design Slide4

Carve a blockSlide5
Slide6
Slide7
Slide8

You’ll be doing 10 prints make something you like!Slide9

Quiz and sketch

Complete the quiz, you have to get a 100% in order to use the carving

tools

You can take it as many time as you need to in order to passWhen you are done with the quizFinish your sketches, get your sketch approved and get your block!

One block per person, ($3-) if we have to replace a blockSlide10

Safety Test

What direction do you cut your

lino

-block?Slide11

Away from youAnd away from other peopleSlide12

What tool other than a gouge do you use when cutting your

lino

-block?Slide13

Bench plate

You always have to have a bench plate under what you are cuttingSlide14

If you get cut, what should you do?Slide15

Put pressure on the cut

Walk over to the sink

Rinse it off with water

Put a paper towel over itGet a Band-Aid from the back counterPlease tell Mrs. Lyon if you cut yourselfSlide16

If you break a gouge tip, what should you do?Slide17

Accidence happen,

Tell

Mrs. Lyon and

she will give you a new gouge tipIf people break more than a few gouge tips, then we will wonder if it’s not an accidentSlide18

What do you have to do to earn your lino

-block?Slide19

You need to get a perfect score on this test & have your sketch for your design turned in.

You can take the test as many times as you need to in order to passSlide20

How many

lino

-blocks do you get for this project?Slide21

Everyone gets only

one

lino-blockSlide22

Quiz Questions…

What direction do you cut your

lino

-block?What tool other than a gouge do you use when cutting

your lino-block?If you get cut, what should you do?

If you break a gouge tip, what should you do?What do you have to do to earn your lino

-block?

How many

lino

-blocks do you get for this project?Slide23

What’s next?

Once you pass your test

Sketch(turn in to get

lino block)CarvingPrintingSlide24

Studio

Goal

2.2.2017

lyone@ogdensd.orgComplete your three sketches for your blockMake them the size of your block so you can transfer the sketches to the

lino-block next classThink about what area you want to carve out and what area you want to leave so it will take the ink in order to print

3 Options: 1) negative positive space, 2)front side and backside, or 3)reductive processSlide25

One Image on top of the other = 2 blocks to print fromSlide26

You could add a boarderSlide27

Think about the direction you carve your line to give it shapeSlide28

Exit Pass 2.2.2017

How do you think you did on the test?

Was the test easy or challenging for you, WHY?

Is the project clear to you or is there something you don’t understand? What questions could you ask to understand the project better?

* See you all Monday next week, enjoy your weekend*